INSTALLATION INSTRUCTIONS

  1. Engine must be off and key removed from ignition.

  2. Locate the injector pump connector. Remove the pump connector by sliding the connector clip.

  3. Identify male and female ends on the DiabloSport PowerPuck.

  4. Connect the DiabloSport PowerPuck male cable end to the factory harness end. Make sure that the interlock connector is completely open.

  5. Connect the DiabloSport PowerPuck female cable end to the Diesel Injection pump. Make sure that the interlock connector closes completely.

  6. The PowerPuck will find its home on top of the fuse cover. (Clean the top of the fuse box cover with the alcohol pad provided. Wait until the alcohol evaporates and the surface is dry.) Carefully peel off the Velcro protective film and firmly affix the PowerPuck in place. Let the Velcro's adhesive dry for 24 hours before removing PowerPuck.